wire saw machine
HXB6060LNC-C Wire Saw Cutting Machine
The HXB6060LNC-C Loop Wire Saw Cutting Machine utilizes high-speed diamond loop wire as the cutting tool for processing silicon carbide, ceramics, quartz, glass, and other materials requiring cutting fluid. Featuring XY two-axis rectangular coordinate configuration with fully enclosed design, this machine enables automatic slicing functions with superior precision and safety.
Equipment Specifications
Model: HXB6060LNC-C
Dimensions: L×W×H (mm) ≈3580×2700×2720
Main Material: Cast iron
Weight: Approx. 5200 kg
Processing Materials:
- Silicon carbide
- Monocrystalline silicon
- Polycrystalline silicon
- Ceramics
- Quartz
- Glass
Working Principle
- Diamond powder electroplated loop wire moves at high speed driven by motion mechanism to achieve material cutting
- XY two-axis guide rail and ball screw linear motion mechanism
- Motion axes driven by stepper motors
- PLC control integrated with NC control system
- Automatic lubrication system
- Fully enclosed protective design
Key Features
High Precision Cutting
- Minimum feed resolution of 0.01mm on both axes
- Repeat positioning accuracy of ±0.02/300mm
- Maximum wire speed of 84 m/sec for efficient processing
Versatile Material Processing
- Suitable for silicon carbide, ceramics, quartz, glass, and silicon materials
- Accommodates workpieces up to 600×600×600mm
- Automatic slicing function with XY coordinate control
Advanced Control System
- PLC control integrated with NC system
- User-friendly touch screen interface
- Programmable cutting patterns and sequences
Safety and Protection
- Fully enclosed design for operator safety
- Complete protective cover system
- Automatic lubrication system for consistent performance
Quality Components
- NSK or SKF precision bearings for reliability
- Mitsubishi/Inovance PLC for stable control
- Premium guide rails and ball screws for accuracy
Technical Training
Comprehensive training is provided upon equipment installation and commissioning:
Training Content Includes:
- Equipment structure and system functions
- Correct use of control instruments and interfaces
- Maintenance procedures and schedules
- Common fault identification and troubleshooting methods
- Safety protocols and best practices
Training Objectives:
- Enable operators to use equipment correctly and efficiently
- Equip maintenance personnel with diagnostic and repair capabilities
- Ensure safe operation and optimal equipment performance
Technical Parameters
| No. | Parameter | Specification |
|---|---|---|
| 1 | Maximum Workpiece Length (mm) | 600 |
| 2 | Maximum Workpiece Width (mm) | 600 |
| 3 | Maximum Workpiece Height (mm) | 600 |
| 4 | Worktable X-axis Travel (mm) | 600 |
| 5 | Worktable Y-axis Travel (mm) | 600 |
| 6 | Wire Length (mm) | Approx. 5432 |
| 7 | Wire Diameter (mm) | 0.35~1.0 |
| 8 | Guide Wheel Diameter | 350mm |
| 9 | Number of Guide Wheel Grooves | 4 |
| 10 | Wire Speed (m/sec) | 84 Max |
| 11 | Drive Motor Power (kW) | 2.2 |
| 12 | Drive Motor Maximum Speed (RPM) | 2840 |
| 13 | X-axis Minimum Feed (mm) | 0.01 |
| 14 | Y-axis Minimum Feed (mm) | 0.01 |
| 15 | X-axis Repeat Positioning Accuracy (mm) | ±0.02/300 |
| 16 | Y-axis Repeat Positioning Accuracy (mm) | ±0.02/300 |
| 17 | Overall Power Consumption (kW) | 5 |
| 18 | Power Supply (Three-phase Five-wire) | AC380V 50Hz |
| 19 | Air Source (MPa) | 0.6 |
| 20 | Equipment Dimensions L×W×H (mm) | Approx. 3580×2700×2720 |
| 21 | Overall Machine Weight (kg) | Approx. 5200 |